When homeowners decide to paint the ceilings in their home, it is often viewed as a very daunting task. But with the proper tools, techniques and a little hard work most people can complete this job.
First of all, if you have a popcorn or textured ceiling, it maybe difficult or even impossible to use a brush and roller to paint this type of ceiling. Oftentimes the texture on the ceiling will begin to come off if when you attempt to roll paint on to the ceiling. If you have a textured ceiling, you will probably need to use an airless sprayer to paint it. If you are not familiar with using an airless sprayer then I would recommend hiring a professional painter to complete the job.
Fortunately most ceilings today do not have texture on them but are smooth, flat ceilings. The following steps are suggested for painting a smooth ceiling with no texture.I strongly suggest you visit spring painting upgrade to learn more about this.
If you are going to undertake this project then you need to invest in a good paint roller, roller extension, brush and a quality ceiling paint and primer. Since you are painting a smooth ceiling, your paint roller should be a short nap roller, preferably a lamb skin because this will give you the best results.
First of all you will want to prepare the room that the ceiling is in before you begin painting. To do this you need to move all of your furniture into the center of the room, leaving yourself enough room on the edges that you can place a step ladder when you begin to cut out the ceiling with paint. Cover all of your furniture with new plastic or paper cover. Then place drop cloths on any exposed flooring.
Next, you will need to decide if you need to prime the ceiling before you paint it. If your ceiling has water stains, smoke damage or other discolorations then you will probably need to apply a coat of oil based primer. You should apply a blocking primer to cover up the stains prior to painting. If you only have one or two small stains, then you can spot prime those areas without priming the entire ceiling. You can even buy primer in a spray can which will be much more convenient and less messy.
After you have completed any priming you can now begin to paint your ceiling. Start by cutting in your ceiling with your ceiling paint where the ceiling meets the wall. Many ceilings will have a thin channel where the wall meets the ceiling. This was formed when the ceiling was originally sanded and can be very helpful when you are cutting in your ceiling paint. If you have crown moulding, then cut in along the edge of your crown moulding. Once the ceiling has been completely cut in you can now use your roller to paint the rest. To begin rolling your ceiling, apply the paint in small sections using light pressure. Make sure that your roller is fully covered in paint but is not over saturated. Apply the paint evenly to the rest of the ceiling.